Category6 SSTP Solid Indoor Cable
Specification

Meets ANSI/EIA/TIA 568-B.2-1 requirements
Meets general purpose cable UL-1581 CM rating
Meets fire retardant low smoke IEC60332-1 rating
Meets plenum UL-910 rating

Description

Shielded Copper cable, 4 pairs, category 6, solid
4 separately foil-shielded twisted pairs
Cable is used for indoor installation

Material

Conductive material: wire made of soft annealed electrolytic copper
Conductor insulation: HDPE
The cable jacket: PVC / LSZH / Plenum
Every pair is separately 100% shielded with polyester aluminum foil

Technical Characteristic

Conductor diameter: 0.56 ± 0.01 mm (0.022" ± 0.0004") (23 AWG)
Insulated conductor diameter: 1.43 mm (0.056")
Outer cable diameter: 7.8 mm (0.3")
Jacket thickness: 0.7 mm (0.0275")
Pulling strength: 130 N maximum
Minimum bend radius: 8xØ while installation, 6xØ while vertical cabling, 4xØ while horizontal cabling



Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
Drain wire diameter: 0.5 mm (0.01968")
Installation temperature is -5°C – +50°C (+23°F – +122°F)
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft (304.8 m): 23 AWG 16.4 kg (36.16 lbs)
Standard package: 304.8 m (1000 ft)
Electrical Characteristic
Frequency, MHz Pair Attenuation, dB/100m (dB/100ft) NEXT, dB PS NEXT, dB PP ELFEXT,
dB/100m (dB/100ft)

PS ELFEXT, dB/100m (dB/100ft) RL, dB
1 2 (0.6) 80 77 75 (22.86) 72 (21.94) 20
4 3.8 (1.16) 80 77 75 (22.86) 72 (21.94) 23
10 6(1.83) 80 77 75 (22.86) 72 (21.94)
25
16 7.6 (2.32) 80 77 75 (22.86) 72 (21.94) 25
20 8.5 (2.59) 80 77 75 (22.86) 72 (21.94) 25
31.25 10.7 (3.26) 80 77 75 (22.86) 72 (21.94) 23.6
62.5 15.4 (4.69) 80 77 75 (22.86) 72 (21.94) 22
100 19.8 (6.03) 80 77 70 (21.34) 67 (20.42) 21
125 22.4 (6.83) 70 67 65 (19.81) 62 (19.90) 20
200 29 (8.84) 70 67 60 (18.29) 57 (17.37) 19
250 35.6 (10.85) 70 67 55 (16.77) 52 (15.04) 18

  Maximum conductor resistance at 20°C (68°F) 73.0Ω/km (117.48Ω/mile)
  Resistance unbalance 2% max.
  Resistance at the frequency of 1-250 MHz 100 ± 15%
  Transfer impedance at the frequency of 1 MHz 50MΩ/m (15.24MΩ/ft) max.
  Transfer impedance at the frequency of 10 MHz 100MΩ/m (30.48MΩ/ft) max.
  Transfer impedance at the frequency of 30 MHz 200MΩ/m (60.69MΩ/ft) max.
  Insulation resistance at 20°C (68°F) 152MΩ/km (244.62MΩ/mile) min.
  Capacitive unbalance at the frequency of 1 kHz 1.5pF/m (0.46pF/ft)
  Capacity at the frequency of 1 kHz 43pF/m (13.1pF/ft)
  Maximum voltage 60V RMS
  Dielectric rigidity 700V per minute
  Propagation velocity 80%
  Max. derivation of propagation delay at freq. of 1-250 MHz 25ns/100m (7.62ns/100 ft)
Ordering Information

HI06TSM-C
i-Net Networks Horizontal Indoor Cable Category6 SSTP Solid 23AWG 4Pair Milky Gray CM
C
C—CL, L—LSZH,P-Plenum